HomeMy WebLinkAboutDELETE (2)RESOLUTION NO. 21-36
A RESOLUTION OF THE PLANNING COMMISSION OF THE CITY OF
RANCHO CUCAMONGA, CALIFORNIA, APPROVING HILLSIDE DESIGN
REVIEW DRC2019-00973 - SITE PLAN AND ARCHITECTURAL REVIEW OF
A 6,871 SQUARE FOOT TWO-STORY SINGLE-FAMILY RESIDENCE WITH
AN ATTACHED 4-CAR GARAGE ON A 20,724 SQUARE FOOT LOT WITHIN
THE VERY LOW (VL) RESIDENTIAL DISTRICT, HILLSIDE OVERLAY
DISTRICT, AND EQUESTRIAN OVERLAY DISTRCIT AT 10839 CARRIAGE
DRIVE; AND MAKING FINDINGS IN SUPPORT THEREOF – APN: 1074-531-
09.
A.Recitals.
1.Molinar Design, Inc. filed an application for the approval of Hillside Design Review
DRC2019-00973, as described in the title of this Resolution. Hereinafter in this Resolution, the subject
Hillside Design Review request is referred to as "the application."
2.On the 12th day of May 2021, the Planning Commission of the City of Rancho Cucamonga
conducted a noticed public hearing on the application and concluded said hearing on that date.
3.On the 26th day of May 2021, the Planning Commission of the City of Rancho Cucamonga
conducted a public hearing on the application and concluded said hearing on that date.
4.All legal prerequisites prior to the adoption of this Resolution have occurred.
B.Resolution.
NOW, THEREFORE, it is hereby found, determined, and resolved by the Planning Commission
of the City of Rancho Cucamonga as follows:
1.This Commission hereby specifically finds that all of the facts set forth in the Recitals, Part
A, of this Resolution are true and correct.
2.Based upon the substantial evidence presented to this Commission during the
above-referenced public hearing on May 26, 2021, including written and oral staff reports, together with
public testimony, this Commission hereby specifically finds as follows:
a.The applicant is requesting to construct a 6,871 square foot two-story single-family
residence with an attached 4-car garage on a 20,724 square foot lot within the Very Low (VL)
Residential District, Hillside Overlay District, and Equestrian Overlay District at 10839 Carriage Drive;
and
b.The site is bordered by single-family residences to the north, south, east, and west.
The surrounding properties are all within the Very Low (VL) Residential District, Hillside Overlay
District, and Equestrian Overlay District; and
c.The project complies with the requirements of the Very Low (VL) Residential District,
Hillside Overlay District and Equestrian Overlay District, including providing a grading design that
balances the requirement to reduce cut and fill to the greatest extent possible; and
Exhibit G
PLANNING COMMISSION RESOLUTION NO. 21-36
HDR DRC2019-00973– MOLINAR DESIGN, INC.
MAY 26, 2021
Page 2
d. The design limits earthwork to 500 cubic yards of import, which is necessary to allow
the construction of the foundation of the residence. The foundation of the residence is stepped with the
existing grade, with the pad at an elevation of 2,092 feet, in conformance with the Hillside Overlay
Design Section 17.122.020.D.1.a to terrace the building to follow the slope. The proposed design does
not require Variances or Minor Exceptions, and the square footage is compatible with the other
residences along Carriage Drive; and
e. The residence is in compliance with Hillside Design Section 17.122.020.D.1.e., which
requires that residences in the Hillside Overlay District be designed to fit within a 30-foot high building
envelope. The applicant has provided north-south and east-west cross-sections with building
envelopes demonstrating compliance with the 30-foot height requirement; and
f. Retaining walls are limited to 4 feet in height or less, in keeping with Hillside
Development Section 17.122.020.G.1.j.
3. Based upon the substantial evidence presented to this Commission during the
above-referenced public hearing and upon the specific findings of facts set forth in Paragraphs 1 and 2
above, this Commission hereby finds and concludes as follows:
a. The proposed project is consistent with the General Plan. The General Plan Land Use
designation of the project site is Very Low (VL) Residential District. The Very Low (VL) Residential
designation is intended for the development of detached, low-density residences on individual lots. The
General Plan also provides a goal of facilitating sustainable and attractive infill development that
complements surrounding neighborhoods. The project is for the development of a single-family
residence on an existing residential lot that is complementary to the surrounding neighborhood.
b. The proposed use is in accord with the objectives of the Development Code and the
purposes of the district in which the site is located. Section 17.36.010 of the Development Code states
that the Very Low (VL) Residential District is for the development of single-family residential uses with
a minimum lot size of 20,000 square feet and a maximum residential density of 2 units per gross acre.
The project site is an existing 20,724 square foot vacant lot that was intended for the development of a
single-family residence.
c. The proposed use is in compliance with each of the applicable provisions of the
Development Code, including building setback, building height, lot coverage, grading limitations and
design. The project complies with the requirements of the Very Low (VL) Residential District, Hillside
Overlay District, and Equestrian Overly District. The required front yard setback is 42 feet (plus or
minus 5 feet), the required side yard setbacks are 10 and 15 feet and the required rear yard setback is
60 feet. The proposed front yard setback is 46 feet, the side yard setbacks are 10 feet and 15 feet, and
the rear yard setback is 60 feet. Lot coverage is 24 percent, well below the maximum permitted lot
coverage of 25 percent. The overall building height is 30 feet which is below the maximum permitted
height limit within the Hillside Overlay District.
d. The proposed use, together with the conditions applicable thereto, will not be
detrimental to the public health, safety, or welfare, or materially injurious to properties or improvements
in the vicinity. The proposed single-family residence is compatible with the existing residences in the
surrounding area and is not expected to create a detrimental impact on the existing neighborhood.
4. The Planning Department Staff has determined that the project is categorically exempt from
the requirements of the California Environmental Quality Act (CEQA) and the City’s CEQA Guidelines.
PLANNING COMMISSION RESOLUTION NO. 21-36
HDR DRC2019-00973– MOLINAR DESIGN, INC.
MAY 26, 2021
Page 3
The project qualifies as a Class 3 exemption under State CEQA Guidelines Section 15303, which
permits the construction of a single-family residence in a residential zone. The project is for the
construction of a single-family residence in a residential zone and there is no substantial evidence that
the project may have a significant effect on the environment. The Planning Commission has reviewed
the Planning Department’s determination of exemption, and based on its own independent judgment,
concurs in the staff’s determination of exemption.
5. Based upon the findings and conclusions set forth in paragraphs 1, 2, 3, and 4 above, this
Commission hereby approves the application subject to each and every condition set forth in the
Standard Conditions, attached hereto and incorporated herein by this reference
6. The Secretary to this Commission shall certify to the adoption of this Resolution.
APPROVED AND ADOPTED THIS 26TH DAY OF MAY 2021.
PLANNING COMMISSION OF THE CITY OF RANCHO CUCAMONGA
BY:
Tony Guglielmo, Chairman
ATTEST:
Anne McIntosh, AICP, Secretary
I, Anne McIntosh, AICP, Secretary of the Planning Commission of the City of Rancho Cucamonga, do
hereby certify that the foregoing Resolution was duly and regularly introduced, passed, and adopted by
the Planning Commission of the City of Rancho Cucamonga, at a regular meeting of the Planning
Commission held on the 26th day of May 2021, by the following vote-to-wit:
AYES: COMMISSIONERS:
NOES: COMMISSIONERS:
ABSENT: COMMISSIONERS:
ABSTAIN: COMMISSIONERS: